Free Float Steam Trap

The internal float of the free float steam trap features high precision, which ensures the sealing performance of the trap. The entire spherical surface can serve as a sealing surface, resulting in an extremely long service life.

Unique Advantages of Free Float Steam Trap

• Equipped with a built-in air vent valve, it is highly sensitive and reliable in operation, which can extend the overall service life of the free float steam trap.

Core Advantages of Free Float Steam Trap

It is not affected by fluctuations in pressure, temperature, or condensate flow, enabling continuous drainage (draining immediately when there is water). With a minimum subcooling degree of 0℃, it can make heating equipment achieve optimal working efficiency. Its minimum working pressure is 0.01MPa, and the maximum backpressure rate is ≤85%.

This product is the most ideal steam trap for industrial heating equipment in petroleum, chemical, printing and dyeing, pharmaceutical, papermaking, food, and other industries.

Specifications and Technical Parameters of Free Float Steam Trap

• Nominal Pressure (PN): 1.6-4.0MPa

• Maximum Operating Temperature (TMO): 350℃

• No-load Air Leakage Rate: Less than 3%

• Subcooling Degree: 0.5%

• Maximum Operating Pressure: [To be supplemented]

Working Principle of Free Float Steam Trap

The free float steam trap has a simple structure, with only one precision-ground stainless steel hollow float inside. The float serves both as a floater and an opening/closing component, with no wearing parts, ensuring a long service life.

1. When the device is just started, air and low-temperature condensate appear in the pipeline. The manual air vent valve can quickly discharge non-condensable gases, and the steam trap starts to work. Low-temperature condensate flows into the trap, the liquid level of the condensate rises, the float rises, and the valve opens.

2. The device quickly increases the temperature. Before the temperature in the pipeline rises to the saturation temperature, the automatic air vent valve has been closed.

3. The device enters normal operation: the amount of condensate decreases, the liquid level drops, and the float adjusts the orifice flow according to the liquid level rise and fall.

4. When the condensate stops entering, the float approaches the valve seat along the medium flow direction, and the valve closes.

The valve seat of the free float steam trap is always below the liquid level, forming a water seal and preventing steam leakage.